Advantages of VT CORP’s Gas Cleaning Plants (ESPs):

1. Unique modular design requires 15 to 20% less in weight as compared to others.

2. Pendulum design structure, which adjusts itself to the thermal expansion due to high temperature gases. Hence no extra requirement of expensive Bridge bearings.

3. Design of collecting electrodes(VT 240) is trapezoidal shape which is effective for
maximum collecting of dust as compared to flat (sigma) design.

4. Collecting electrode rapping mechanism:
The collecting electrode wall hangs loosely from the carrier beam support at the roof beam level at the top. The wall is connected by a rapping bar at the bottom each wall is rapped by its individual hammer.

5. Vibration measurement on collection electrodes:
Acceleration available on Collecting Electrode of VT 240 type is 985G max & 250 G minimum whereas 100 G is minimum requirement for dislodging dust particles.

6. Discharge electrode rapping mechanism:
In between two Collecting Electrodes there is Discharge Electrode frame & each one is rapped separately. Hammering is done in middle of the frame.

7. Support insulator:
It is housed in roof beam which is away from the gas stream it is not subjected To the twist force as it is not in line with shaft.

8. Gas distribution plates:
Special shape X type & different sizes distribution plates are provided instead for flat type which results in proper distribution of gases thereby increasing the efficiency.

9. Flat type discharge electrodes in II field to achieve optimal current/voltage characteristics.